On the smooth opposite side of the two parts are thermal pads; for the top piece, there are three that stick to the SoC, power management IC, and Wi-Fi and Bluetooth module. The base section is almost totally covered by a single thermal pad that sticks to the underside of Raspberry Pi 5.
Unlimited access
The two case parts are secured in place with long bolts. With no side pieces, access to Raspberry Pi 5’s ports is unobstructed. Cutouts in the top part give access to the GPIO pins and PoE header. There are also slots for the two camera/display MIPI ports and the UART and RTC battery connectors, while the fan connector remains uncovered.
So, how much cooling does this case provide? A lot! When idle, Raspberry Pi 5 was 10–15°C cooler than without a case; running a stress test, the difference was around 40°C.
Verdict
9/10
Provides an impressive amount of cooling while giving full access to all Raspberry Pi 5’s ports.
Specs
Cooling: Two large heatsink panels (top and base) with thermal pads attached
Features: Cutouts/slots for all Raspberry Pi 5 top-side ports; open sides for the others
